— From our Manufacturing Plant to Your Office Since 1956 —
Our team, located in Arcadia, California, is thrilled to announce that our plant renovation has finally been completed. We look forward to continuously evolving our company to work efficiently to sustain and improve our services to our loyal customers.
Orders generally ship within 1-2 business days and we are committed to providing our customers with the best service possible. Determined to serve the specific needs of all of our customers we offer custom solution capabilities. If you require a part not currently listed on our website, please reach out to us so our dedicated team can work with you to designing and manufacturing the specific part for you!
It’s been over two years since we received our ISO 9001:2015 certification. Since that time E-Z-Hook has been through three successful audits. We are proud of our ongoing improvements that are constantly being implemented across departments.
Constant Improvement | Expect Excellence
We consistently review internal and external feedback to improve our procedures and ensure our customers get not only the best service, but the best quality product. E-Z-Hook is proud of the effort our team places on adhering and living by the spirit of the ISO 9001:2015 standard.
We like to think our products are certifiably well made – why don’t you give them a try and tell us!
Both the X100W mini-hook and XM micro-hook style are available in high temperature versions.
When environments or sterilization processes require products to withstand high temperatures we have existing options in our “standard” product offering.
In both our X100W and XM product line we offer a modified “x” version (p/n X100WX and XMX) that is molded with mineral reinforced nylon. These modified versions have been tested to support high temperatures for extended periods at 122C (250F) and short cycles as high as 150C (300F).
If higher temperatures are required then our X100WXH (available in black, white and gray) is tested to 175C (350F) for short period and 150C (300F) for extended periods.
All of these parts can be made into high temperature test leads by using our 300 series (24 AWG Teflon Wire).
Let us know your requirements and we will always do our best to offer a product solution.
In 1980 E-Z-Hook entered the automotive sector with our XJL insulation macro-hook connected to a lead with a standard alligator connector on the other side. This product 619XJL was offered in a black and red set of 18″, 36″ , and 60″ standard lead lengths. Today, 36 years later, this product can still be found in most automotive jobber trucks (think Matco, Snap-On, MacTool, etc). We have sold thousands of this product, which single handedly helped us enter the automotive after market for repair and testing.
Today the 619XJL remains a staple, and one of our most popular automotive leads. Variations of this test lead set include a straight banana plug connector or a shrouded right angle connector. All of these products work with most standard Digital Multi-Meters. For environments that require a higher heat resistance and more durability than our standard PVC wire provides, we do offer all test leads with silicone wire if requested.
In the early 90’s we introduced our XEL piercing hook into the automotive market. This narrower hook has an angled front to navigate through wire bundles, as well as a v-shaped design for grabbing and centering the wire or cable prior to piercing. It was introduced as an alternative lead set combination to the XJL options. In addition we designed it to be available without a factory installed lead. This XEL version offers a shrouded banana socket on either handle side, allowing easy flexibility to use with any standard banana plug lead. Much like our XJL versions, the XEL has become a popular staple in most auto repair and test mechanics tool boxes.
So, what next? As we spoke to distributors and automotive jobbers we realized that the automotive repair and test aftermarket really lacked in the “accessory” area. For most equipment companies the test leads and components were an after thought – and often not well designed or manufactured products. Automotive technicians would purchase fabulous multi-meters but the test cables supplied with these were often junk, couldn’t carry a proper signal, and needed replacement within a year. At E-Z-Hook these test leads, test cables, and connectors are our specialty. That is what we focus our manufacturing quality on so we could easily compete with great replacement products and test kits.
That is exactly what we have continued to do in these past 10+ years. Today in addition to our standard XJL and XEL test lead sets we offer various banana plug lead sets and individual leads specifically designed for automotive use. One of my personal favorites is our 9183-144BLK banana plug jumper test lead. Why do I like it – because while learning about our products for this industry I asked why in the world would we make something so long? 144 inches? 12 Feet? I was reminded that this length (the approximate length of a car) would allow a technician to be on one side and connect to something on the other. Made sense to me, and obviously to a lot of automotive test and repair technicians. Due to it’s popularity in the field we now bundle this test jumper in with many of our automotive kits. It can be purchased individually or is part of our popular 3519 and 3520 test lead sets. In addition to leads we offer various kits including our insulation piercing hooks as well as alligator clips, back probe needles and other connectors. All kits include various lead options and are offered with either our XJL or XEL piercing macro-hooks or the 8064 needle back probes which we just introduces to the market in late 2015.
Testing was never so easy. Over 35 years of PROVEN EXPERIENCE IN THE FIELD.
A large multi-state Mid-West power company approached E-Z-Hook to see if we could manufacture custom leads using the copper blade version of our macro-hook test connectors, model XH and XHL. The leads would ultimately be used by plant technicians testing power and required a secure right angle bend on the hooks.
Included in the requirement was the ability to close the power circuit after checking that the hook connection was properly connected. We designed in a “key” concept they requested. It was built into the jumper, allowing the user to close the circuit after the connection was verified as good. Additionally we designed jumpers with a similar fused “key” for further security which was required in some test environments. In the end, E-Z-Hook created four variations of leads, some containing a 3 AMP, 250 Volt fuse.
Since 1956 E-Z-Hook has been making quality test products and accessories. Sure we have changed, grown, and added product lines. As required we have altered our manufacturing process to ensure our product line adheres to regulations such as REACH, ROHS, and the Dodd-Frank Conflict Mineral Act. We no longer operate out of a personal garage in Kentucky like we did in 1956, but in our own 24,000 square foot manufacturing plant in Arcadia, California. Instead of one person designing and making the products, we have a team of employees, many with over 25 years of experience.
WE HAVE CHANGED. WE HAVE GROWN. WE ARE DIFFERENT………
OR ARE WE REALLY JUST THE SAME?
It caught my attention while I was filing away old marketing materials that our marketing message was the same. How funny. In hearing this you might think, yikes, 60 years and still saying the same thing? Yes, in fact, 60 years and we are still saying the same thing. It’s not because our marketing department has been lazy, or ineffective, or void of fresh ideas. It’s because 60 years ago our marketing focus was on the attributes of our products. Those product attributes haven’t changed, and we are proud of that!
Connectors Built To Last
Easy to Use – Quality Construction – Durable – Saves Time – Saves Money – Efficient – Connectors that Stay On
Test & Measurement accessory users like their testing equipment customized to fit their specific applications. Thankfully, E-Z-Hook is more than willing to work with our clients to meet their demands. Give us a call and let us know what you are looking for in your electronic test accessory so we can work with you to fulfill your request. See how we have helped others meet their needs here.
Your project requires special custom cable assemblies with intricate configurations and specifications, but you don’t want to use your engineering department’s precious time to make cable assemblies. Yet, your requirement seems too low of a volume to farm out to a manufacturer of cable assemblies.
Using a standard product from our catalog, our alligator to banana plug patch cord we were able to accommodate a client’s need to run 115 volts with 11 amps and 220 volts with 7.0 amps through a patch cord by providing a larger gauge wire (14AWG) in place of the standard 18 AWG.
Having various wire gauges in house we can quickly respond to our client’s needs and provide a customized product, made just for them.