The original long test hook, our XL1 model simply offers an extended body version of our X100W. The body is 5″ (127 mm) long to reach through wiring nest up to 4″ (101.6 mm) deep. The blade and hook design is virtually the same as our basic X100W model, and like all of our test […]
A Government and Defence client needed an effective solution that had to fulfil specific space and material requirements. The client was looking for a minimally invasive micro piercing connector that makes a mid-line connection. Upon connection, the device needed to remain engaged until removed. Leveraging our automotive macro piercing technology we designed and manufactured two micro […]
The XK double gripper is designed for hard to make test connections of varying sizes and shapes. The narrow configuration allows stacking of the test connectors side by side for high density IC packages. The two gold-plated blades are retracted by a single stainless steel compression spring All XKs purchased with factory installed leads (ex. […]
The P25 is designed specifically for narrow test contact areas. An ultra-thin blade and housing allows connector stacking and easier access. The .025″ square pin allows for multiple .025″ square socket lead options to be easily attached. The P25 test hooks can be purchased individually, as a set of 10 assorted colors or as sets […]
An anti-rotational hook is just one of the features of this advanced new part. This new micro-hook features a narrow design that allows for multiple side by side hook-ups to delicate wire or components. A stronger, thicker and wider blade material is made to withstand high usage and provide positive, solid connections with each hook-up. […]
We’ve been getting great feedback recently about a huge number of uses for these X2015 hooks. Our clients love them. Why not try on today? The X2015 is the smallest of our micro double hook’s, this part is designed for use with surface mount devices or where connection point is very small. The insulated shaft […]
The XM25 Micro-Hook is designed for use where weight and leverage may damage components. Its lightweight body (less than 1 gram) and hypo-action hook easily allows for direct hook up to delicate wires and components. Identical to standard XM model except a one-piece gold plated beryllium copper blade forms hook, conductor and 0.025″ (0.635 mm) […]
We’ve specially designed our E-Z-Micro-Lock XG connectors to slip into PC board test point holes and lock onto the board. This test lead consists of an XG25 micro-lock to 0.250″ (6.35mm) insulated spade lug. Standard wire is 22 AWG PVC.
